We customize any storage solution to fit your space.
- 3/4 inch furniture-grade melamine which is composed of wood that is thermofused with a hard plastic resin creating a very dense, durable, stable wood product.
- All wood purchased locally and closet components are cut in our workshop in Hot Springs, AR customized to fit your space.
- All steel hardware.
- Full-extension, ball-bearing drawer slides.
Wood is available in a variety of melamine laminates; White, almond, several shades of Grey, Black, Natural Maple, Cherry, Mahogany and Gunstock Walnut. Vertical panels, shelves, doors and drawers are 3/4" thick.
Panels are covered with a high quality thermofused melamine. Favorite Spaces uses the highest quality particleboard -- the same board used in fine furniture and kitchen cabinets.
The particleboard is strong. It has a modulus of rupture of 2500# per square inch, and has excellent screw holding properties.
Drawers consist of drawer box made of 3/4 inch melamine, 1/4 inch Bottom, and 3/4 inch adjustable Face which is screwed to the drawer box. High quality European hardward is used on drawers and Doors.
All particleboard meets HUD standards on formaldehyde emissions. All particleboard used emits less than 0.3 parts per million when tested in accordance to the test procedures specified by the Department of Housing and urban development using the specified air chamber test method. (Regulation #24CFR3280)
The particleboard substrate used is recognized by the U.S. Department of Housing and urban Development, Underwriter’s Laboratories, and model building codes as having a Class III, below 200 flame spread rating.
As with any other wood furniture product, the material must be kept away from any open flame. The material must not be place directly next to any radiator, heat duct, or other heat source, and must have adequate ventillation when installed in the vicinity of any heat source.